issues on serviveguard config file

[pedliz11]

i have this config file on a serviceguard cluster:FIRST_CLUSTER_LOCK_VG /dev/vgroms


# Definition of nodes in the cluster.
# Repeat node definitions as necessary for additional nodes.

NODE_NAME hpdnp300
NETWORK_INTERFACE lan1
STATIONARY_IP 192.168.0.23
NETWORK_INTERFACE lan4
STATIONARY_IP 192.168.1.24
NETWORK_INTERFACE lan5
HEARTBEAT_IP 151.119.94.29
NETWORK_INTERFACE lan10
FIRST_CLUSTER_LOCK_PV /dev/dsk/c35t0d2
# List of serial device file names
# For example:
# SERIAL_DEVICE_FILE /dev/tty0p0

# Primary Network Interfaces on Bridged Net 1: lan1.
# Warning: There are no standby network interfaces on bridged net 1.
# Primary Network Interfaces on Bridged Net 2: lan4.
# Warning: There are no standby network interfaces on bridged net 2.
# Primary Network Interfaces on Bridged Net 3: lan5.
# Possible standby Network Interfaces on Bridged Net 3: lan10.

NODE_NAME hpdnp293
NETWORK_INTERFACE lan1
STATIONARY_IP 192.168.0.21
NETWORK_INTERFACE lan10
STATIONARY_IP 192.168.1.22
NETWORK_INTERFACE lan5
HEARTBEAT_IP 151.119.94.23
NETWORK_INTERFACE lan11
FIRST_CLUSTER_LOCK_PV /dev/dsk/c35t0d2
# List of serial device file names
# For example:
# SERIAL_DEVICE_FILE /dev/tty0p0

# Primary Network Interfaces on Bridged Net 1: lan1.
# Warning: There are no standby network interfaces on bridged net 1.
# Primary Network Interfaces on Bridged Net 2: lan10.
# Warning: There are no standby network interfaces on bridged net 2.
# Primary Network Interfaces on Bridged Net 3: lan5.
# Possible standby Network Interfaces on Bridged Net 3: lan11.



are there any issues with this serviceguard cluster? I am not sure there is any issues pls advise

[Michal Kapalka (mikap)]

hi,

you should check the logs of the cluster.

mikap

[Kapil Jha]

how can you expect anyone to tell you if there is some issue with cluster jusy by looking over some bunch of lines.

You have to tell what exactly you looking for?
any error you getting?

BR,
Kapil+

[pedliz11]

just wanted to know what the warnings are telling me. Checked the logs no problems just concerned about the warings of no standby network interfaces on bridged net 1 and bridged net2 ?

[pedliz11]

it was an additional card card that needed to be confgured as the secondary standby lan