Itanium and MSL5000

[Carme Torca]

Hi,

I have connected one MSL5000 to an itanium server (ia64 hp server rx2620), but I cannot see it.
The ioscan shows:

ext_bus 3 0/1/1/1 mpt CLAIMED INTERFACE SCSI Ultra320
/dev/mpt3

but nothing more.
Do I have to define something more?, or enable something?

Thanks a lot of!
Carmen.

[Dave Hutton]

Do you have the stape module loaded?

[Carme Torca]

I don't know.
How can I do this in itanium?

Thanks!
Carmen.

[Torsten.]

Please post an "ioscan -fn".

[Carme Torca]

Here you are,


#ioscan -fn
Class I H/W Path Driver S/W State H/W Type Description
===============================================================================
root 0 root CLAIMED BUS_NEXUS
ioa 0 0 sba CLAIMED BUS_NEXUS System Bus Adapter (1229)
ba 0 0/0 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
OO 0 0/0/1/0 UsbOhci CLAIMED INTERFACE USB OHCI Interface
OO 1 0/0/1/1 UsbOhci CLAIMED INTERFACE USB OHCI Interface
OO 2 0/0/1/2 UsbEhci CLAIMED INTERFACE USB EHCI Interface
sideba 0 0/0/2/0 side_multi CLAIMED INTERFACE CMD IDE controller
ext_bus 0 0/0/2/0.0 side CLAIMED INTERFACE IDE Primary Channel
target 0 0/0/2/0.0.0 tgt CLAIMED DEVICE
disk 0 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-N
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
target 1 0/0/2/0.0.7 tgt CLAIMED DEVICE
ctl 0 0/0/2/0.0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
ext_bus 1 0/0/2/0.1 side CLAIMED INTERFACE IDE Secondary Channel
target 2 0/0/2/0.1.7 tgt CLAIMED DEVICE
ctl 1 0/0/2/0.1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c1t7d0
ba 1 0/1 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
ext_bus 2 0/1/1/0 mpt CLAIMED INTERFACE SCSI Ultra320
/dev/mpt2
target 3 0/1/1/0.0 tgt CLAIMED DEVICE
disk 1 0/1/1/0.0.0 sdisk CLAIMED DEVICE HP 146 GST3146707LC
/dev/dsk/c2t0d0 /dev/rdsk/c2t0d0
target 4 0/1/1/0.1 tgt CLAIMED DEVICE
disk 2 0/1/1/0.1.0 sdisk CLAIMED DEVICE HP 146 GST3146707LC
/dev/dsk/c2t1d0 /dev/dsk/c2t1d0s2 /dev/rdsk/c2t1d0 /dev/rdsk/c2t1d0s2
/dev/dsk/c2t1d0s1 /dev/dsk/c2t1d0s3 /dev/rdsk/c2t1d0s1 /dev/rdsk/c2t1d0s3
target 5 0/1/1/0.7 tgt CLAIMED DEVICE
ctl 2 0/1/1/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c2t7d0
ext_bus 3 0/1/1/1 mpt CLAIMED INTERFACE SCSI Ultra320
/dev/mpt3
target 6 0/1/1/1.7 tgt CLAIMED DEVICE
ctl 3 0/1/1/1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c3t7d0
lan 0 0/1/2/0 iether CLAIMED INTERFACE HP PCI-X 1000Base-T Dual-port Built-in
lan 1 0/1/2/1 iether CLAIMED INTERFACE HP PCI-X 1000Base-T Dual-port Built-in
ba 2 0/2 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
ba 3 0/2/1/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
fc 0 0/2/1/0/4/0 fcd CLAIMED INTERFACE HP A9784-60002 PCI/PCI-X Fibre Channel FC/GigE Combo Adapter (FC Port 1)
/dev/fcd0
fcp 0 0/2/1/0/4/0.20 fcd_fcp CLAIMED INTERFACE FCP Domain
ext_bus 8 0/2/1/0/4/0.20.11.0.0 fcd_vbus CLAIMED INTERFACE FCP Array Interface
target 10 0/2/1/0/4/0.20.11.0.0.0 tgt CLAIMED DEVICE
disk 15 0/2/1/0/4/0.20.11.0.0.0.0 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c8t0d0 /dev/dsk/c8t0d0s2 /dev/rdsk/c8t0d0 /dev/rdsk/c8t0d0s2
/dev/dsk/c8t0d0s1 /dev/dsk/c8t0d0s3 /dev/rdsk/c8t0d0s1 /dev/rdsk/c8t0d0s3
disk 17 0/2/1/0/4/0.20.11.0.0.0.1 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c8t0d1 /dev/rdsk/c8t0d1
disk 18 0/2/1/0/4/0.20.11.0.0.0.2 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c8t0d2 /dev/dsk/c8t0d2s2 /dev/rdsk/c8t0d2
/dev/dsk/c8t0d2s1 /dev/dsk/c8t0d2s3
disk 19 0/2/1/0/4/0.20.11.0.0.0.3 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c8t0d3 /dev/rdsk/c8t0d3
disk 21 0/2/1/0/4/0.20.11.0.0.0.4 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c8t0d4 /dev/rdsk/c8t0d4
disk 23 0/2/1/0/4/0.20.11.0.0.0.5 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c8t0d5 /dev/dsk/c8t0d5s2 /dev/rdsk/c8t0d5
/dev/dsk/c8t0d5s1 /dev/dsk/c8t0d5s3
ext_bus 9 0/2/1/0/4/0.20.11.255.0 fcd_vbus CLAIMED INTERFACE FCP Device Interface
target 9 0/2/1/0/4/0.20.11.255.0.0 tgt CLAIMED DEVICE
ctl 20 0/2/1/0/4/0.20.11.255.0.0.0 sctl CLAIMED DEVICE NETAPP VSA CONTROLLER
/dev/rscsi/c9t0d0
ext_bus 10 0/2/1/0/4/0.20.123.0.0 fcd_vbus CLAIMED INTERFACE FCP Array Interface
target 8 0/2/1/0/4/0.20.123.0.0.0 tgt CLAIMED DEVICE
disk 16 0/2/1/0/4/0.20.123.0.0.0.0 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c10t0d0 /dev/dsk/c10t0d0s2 /dev/rdsk/c10t0d0 /dev/rdsk/c10t0d0s2
/dev/dsk/c10t0d0s1 /dev/dsk/c10t0d0s3 /dev/rdsk/c10t0d0s1 /dev/rdsk/c10t0d0s3
disk 20 0/2/1/0/4/0.20.123.0.0.0.1 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c10t0d1 /dev/rdsk/c10t0d1
disk 22 0/2/1/0/4/0.20.123.0.0.0.2 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c10t0d2 /dev/dsk/c10t0d2s2 /dev/rdsk/c10t0d2
/dev/dsk/c10t0d2s1 /dev/dsk/c10t0d2s3
disk 24 0/2/1/0/4/0.20.123.0.0.0.3 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c10t0d3 /dev/rdsk/c10t0d3
disk 25 0/2/1/0/4/0.20.123.0.0.0.4 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c10t0d4 /dev/rdsk/c10t0d4
disk 26 0/2/1/0/4/0.20.123.0.0.0.5 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c10t0d5 /dev/dsk/c10t0d5s2 /dev/rdsk/c10t0d5
/dev/dsk/c10t0d5s1 /dev/dsk/c10t0d5s3
ext_bus 11 0/2/1/0/4/0.20.123.255.0 fcd_vbus CLAIMED INTERFACE FCP Device Interface
target 7 0/2/1/0/4/0.20.123.255.0.0 tgt CLAIMED DEVICE
ctl 21 0/2/1/0/4/0.20.123.255.0.0.0 sctl CLAIMED DEVICE NETAPP VSA CONTROLLER
/dev/rscsi/c11t0d0
lan 2 0/2/1/0/6/0 igelan CLAIMED INTERFACE HP A9784-60002 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter
ba 4 0/3 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
ba 5 0/3/1/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
lan 3 0/3/1/0/4/0 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 4 0/3/1/0/4/1 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 5 0/3/1/0/6/0 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 6 0/3/1/0/6/1 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
ba 6 0/4 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
ba 7 0/4/1/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
lan 7 0/4/1/0/4/0 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 8 0/4/1/0/4/1 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 9 0/4/1/0/6/0 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
lan 10 0/4/1/0/6/1 iether CLAIMED INTERFACE HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter
ba 8 0/5 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
ba 9 0/5/1/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
fc 1 0/5/1/0/4/0 fcd CLAIMED INTERFACE HP A9784-60002 PCI/PCI-X Fibre Channel FC/GigE Combo Adapter (FC Port 1)
/dev/fcd1
lan 11 0/5/1/0/6/0 igelan CLAIMED INTERFACE HP A9784-60002 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter
processor 0 120 processor CLAIMED PROCESSOR Processor
processor 1 121 processor CLAIMED PROCESSOR Processor
ba 10 250 pdh CLAIMED BUS_NEXUS Core I/O Adapter
ipmi 0 250/0 ipmi CLAIMED INTERFACE IPMI Controller
/dev/ipmi
tty 0 250/1 asio0 CLAIMED INTERFACE Built-in RS232C
/dev/diag/mux0 /dev/mux0 /dev/tty0p0
tty 1 250/2 asio0 CLAIMED INTERFACE Built-in RS232C
/dev/diag/mux1 /dev/mux1 /dev/tty1p0
acpi_node 0 250/3 acpi_node CLAIMED INTERFACE Acpi Hardware

[Carme Torca]

Hi,

Does anyone could help me?
Thanks!

[JASH_2]

Carme,

From ioscan before, it looks like it sees the robot.

Try:-

insf -eC tape

Then do

ioscan -fnC tape

If nothing there, then check your kernel for the stape driver. Use sam and go into kernel parameters and drivers. If not in add it into kernel and repeat the above. This will then show you your tape drives.

Hope this helps,

JASH

[Luk Vandenbussche]

Hi Carmen,

Add the drivers stape and schgr to your kernel.
schgr is for the robot arm.

To this through sam

kernel configuration
Modules

A reboot is required after these drivers are added to the kernel.

[Torsten. · Accepted solution]

Sorry, but I can't see your library.

Without the kernel drivers it should like this (other HW path of course):

unknown -1 1/0/4/0/0.5.10.255.0.0.0 UNCLAIMED UNKNOWN HP
MSL6000 Series

after driver is added

autoch -1 1/0/4/0/0.5.10.255.0.0.0 schgr CLAIMED DEVICE HP
MSL6000 Series


The "mpt" device is the SCSI HBA inside the server only.

To add the driver go to

SAM -> Kernel Configuration -> Module -> Modify -> schgr

Enter new state ( s-static u-unused ) OR q(Quit) = s

Do you want to save the current kernel configuration ? (y/n/q)[y] = y

Please check your cabling and termination first.