K200 system hw and os relation

[KCS_1]

Hi~ everyone!

Do you know which's OS can ported in HP/K200 system? 10.0 or 10.20 or both or anything else?
I don't know surely..

can u help me?

thanxs,,have a good time!!

[Animesh Chakraborty]

Both.
Beter go for minimum 10.20(y2k
versions)

[Bill Hassell · Accepted solution]

Do not install 10.0--it is completely obsolete and full of Y2K bugs. 10.20 requires lots of patches (and it is also obsolete). 11.0 is the minimum I would install. Your K200 will run in 32bit mode only.

[S.K. Chan]

Since the initial release of 11.00 (32 bit) all the K-class range of servers are supported. That is most probably a good choice for you unless there is a valid reason why you would prefer 10.20 instead.

[KCS_1]

hp-ux 10.20 and 11.0(only 32bit)..

That's sound like good!!

thanxs for all replied peoples..

do u have to give me anything else?

[Michael Tully]

Hi,

Have a look at this chart. Your best bet is HPUX 11, but as suggested it will run only in 32 bit mode. 10.20 will be obsolete end of June 2003.

http://devresource.hp.com/STK/serversupport.html

HTH
Michael

[S.K. Chan]

Go through the 11.00 FAQ at least for additional info you may need.
http://docs.hp.com/hpux/onlinedocs/os/osfaq.html

[KCS_1]

thanks a lot for all members..

That're gave to me more informations..

Don't forgot heathy is career!!