Kernel parameters on 11i and 11.0

[CA813839]

I need to know if when y0u change kernel parameters in 11i you can just: mk_kernel -s /standysystem -o /stand/vmunix and that would suffice to have the kernel changed, all to do is reboot the machine after it. Is it necessary to use kmupdate . When using kmtune, do we need to mk_kernel or we can just kmupdate. On 11.0 is it correct that we just need to vi /stand/system; mk_kernel -s /stand/system and reboot the system. thank you . antonio

[CA538024]

Hi Antonio,

Depending on the HP product you're using, please post this question in the appropriate section of the Business Customer Discussion Groups. Here's a link to the home page for these forums:

http://forums.itrc.hp.com/cm/1,,2,00.html

If your product doesn't appear in these forums, try the ITRC forums:

http://forums.itrc.hp.com/cm/

If all else fails, here's a web site to help you find support for your product:

http://h20000.www2.hp.com/bizsupport/TechSupport/CallHP.jsp

Thanks!

Kathy
Forum Administrator