HPE Community
Operating System - HP-UX
1837032 Members
2064 Online
110111 Solutions
New Discussion

Kernel tuning for telnet users

 
SOLVED
Go to solution
Tony Flaherty
Frequent Advisor

‎09-09-2002 01:16 AM

‎09-09-2002 01:16 AM

Kernel tuning for telnet users

hi,

I have an L5430 hpux 11.11
approx 120 users connecting with telnet, BUT, no more than 60 can connect, I've found the NSTRPTY and NSTRTEL, NPTY is already set to 200. Are there any other paramaters I need to consider?

I'm rebooting in a little less than three hours and to limit the amount of egg on my face I need to get this right.

Thanks!
There are 10 types of people in the world, Those who understand Binary and those who don't.
0 Kudos
Reply
2 REPLIES 2
Bill McNAMARA_1
Honored Contributor

‎09-09-2002 01:23 AM

‎09-09-2002 01:23 AM

Solution

Re: Kernel tuning for telnet users

Yes, you must reboot.
See this link:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xe0ed35067c18d6118ff40090279cd0f9,00.html

Later,
Bill
It works for me (tm)
Reply
Rory R Hammond
Trusted Contributor

‎09-10-2002 08:38 AM

‎09-10-2002 08:38 AM

Re: Kernel tuning for telnet users

if these are already set,
And your limit is 60, I am not sure a reboot will fix your limit problem.

you might try
insf -e -n 200 -s 200

before rebooting
There are a 100 ways to do things and 97 of them are right
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.