HPE Community
Operating System - HP-UX
1827245 Members
2155 Online
109716 Solutions
New Discussion

L3000/rp5470 and HP-UX 11iv2

 
SOLVED
Go to solution
Pete Kelly
Frequent Advisor

‎10-02-2009 01:52 AM

‎10-02-2009 01:52 AM

L3000/rp5470 and HP-UX 11iv2

Hello All,

I have an HP9000 server model L3000/rp5470 currently running HP-UX 11i v1. According to the HCL, I can not upgrade this server to HP-UX 11i v3, but can upgrade to HP-UX 11i v2.. Is this correct? Would a cold install be the best option for upgrade?

Any advice would be most welcome
0 Kudos
Reply
3 REPLIES 3
Pete Randall
Outstanding Contributor

‎10-02-2009 02:00 AM

‎10-02-2009 02:00 AM

Solution

Re: L3000/rp5470 and HP-UX 11iv2

Pete,

Here's the official matrix:

http://h20338.www2.hp.com/hpux11i/downloads/public_hp-ux_systems_support.pdf

So yes, it is correct that you can only go to V2 and yes, I would recommend a cold install (always).


Pete

Pete
Reply
Pete Kelly
Frequent Advisor

‎10-02-2009 02:15 AM

‎10-02-2009 02:15 AM

Re: L3000/rp5470 and HP-UX 11iv2

Hi... thanks for the prompt response. Just as I thought. Cheers
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎10-02-2009 02:22 AM

‎10-02-2009 02:22 AM

Re: L3000/rp5470 and HP-UX 11iv2

11.11 and 11.23 are possible. Check the quickspecs of 11.23 for all supported HBAs - some are no longer supported (e.g. HVD SCSI)!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.