Operating System - HP-UX
1833883 Members
1776 Online
110063 Solutions
New Discussion

Link aggregation in a failover group

 
fsumair_1
Advisor

Link aggregation in a failover group

Hi,

I have recently installed a server with HP-UX 11.23. This server has 4 Lan card.
I need to configure link aggregation with failover.
The situation is, Port 0 and 1 is connected to one switch and Port 2 ,3 is connected to another switch. I have only IP address.

I was able to configure Failover group by using 2ports, port 0 and port 3.

Now I want to aggregate port 0 ,1 and on the other switch port 2,3.

Then create a failover group of these two aggregated groups links lan900 and lan901.

I am having trouble doing this. Could any one guide me how to do this.

I will be very thankful

regards
Farrukh
1 REPLY 1
YAQUB_1
Respected Contributor

Re: Link aggregation in a failover group

Hi,

First of all U check Ur system APA (Auto-Port Aggregation) license is there?

# swlist -l bundle
J4240AA B.11.23.10 Auto-Port Aggregation Software

Then U put the following commands output:-

# uname -a
# model
# ioscan -f
# ioscan -fnC lan
# ioscan -kfnC lan
# lanscan -v

BR/
Yaqub