LVM mirror in HPUX 11i V3

[Jeeshan]

Dear all

Can anyone tell me how can i mirror my local HDD in HPUX 11i V3 ?

Jeesun

[Eric SAUBIGNAC]

Hi Jeesun

Take a look at this recent thread. Everything is there :

Itanium Boot Mirror Setup http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1176954


Regards

Eric

[Eric SAUBIGNAC]

Sorry : a mistake as you was speaking of HP-UX 11iv3. Forgot my answer :-(

Eric

[Torsten.]

Here is a link:

http://docs.hp.com/en/5991-6481/ch03s04.html#cbddaicd

Choose your topic.

â Mirroring the Boot Disk on HP 9000 Servers"

â Mirroring the Boot Disk on HP Integrity Serversâ

[Jeeshan]

Sorry to tell you i'm asking for PA-RISC based.

[rajdev]

Hi,

The link by Torsten, has details for both PA-RISC and Integrity servers and he has also given the topic details.

For PA-RISC see the topic under :
Mirroring the Boot Disk on HP 9000 Servers

Regards,
RD

[Torsten.]

HP9000 is PA-RISC:

http://docs.hp.com/en/5991-6481/ch03s04.html#cbdfgcii

[Eric SAUBIGNAC]

Well, after taking a look at the link given by torsten, i find that it is not very different from mirroring system's disk in HP-UX 11iv2 : the main difference is on special files naming convention and hardware paths.

So the thread i pointed in my first answer could be a good beginning for you since you will find some cooked way to do it.

Regards

Eric

[Torsten.]

If you use the "old style" device files it works, but you have only all advantages if you are using the "new" device files.

[Jeeshan]

thnaks all participants