** Make Recovery Problem **

[Michael Gretton]

I am trying to make a network recovery archive using Ignite. I have my destination directory set with the proper permisions and it is exported. I can see that the client box (the one I am trying to make a recovery archive for) can mount that filesystem. I have even tested that it can copy to that filesystem with no problems. However, when running make recovery, the GUI comes back and fails during the step labeled "Run the Recovery UI". Looking at the log, I see this error:

ERROR: Connection to the server failed.

This makes no sense. I am able to go from one machine to the other using the mount points and I just don't get it.

Please help.

Thanks,

Mike

[Sanjay_6]

Hi,

Try this link for ignite,

http://www.software.hp.com/products/IUX/docs/sysadm.html

Look at chapter 2,

Hope this is what you are looking for.

Regds

[T. M. Louah]

here's a thread that points to an interesting make_net_recovery issue:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x6a093d853cd9d5118ff40090279cd0f9,00.html

Remember! assigning points is a common practice!
g'd luck
T++