make_recovery via an AT schedule

[Tommy Brown]

Has any one ever done a make_recovery tape after hours with an AT command. Was it tested afterward?
thanks,
Tommy

[Rick Garland · Accepted solution]

I use cron. It works fine - no trouble. After the make_recovery process is complete, it sends me an e-mail telling me it completed, the time it started, and whether it was sucessful of failed.

[Stefan Farrelly]

We run make_recovery regularly over the weekend using cron, and test it regularly, works fine.

[Victor BERRIDGE]

I also never had problem using cron with make_recovery
Good luck

[Tommy Brown]

Thanks, All of you, I will set this up ASAP.
Thanks again.
Tommy