make_tape_recovery error

[Robert Grabowy]

I am running the following command:
make_tape_recovery -Iv -x inc_entire=vg00 -x exclude=/tmp -a /dev/rmt/1mn
In the recovery log, I'm getting the following error in the attachment.

any ideas?
This is a hp-ux 11.0 server running ignite B.4.1.61

[Sridhar Bhaskarla]

I suggest the following.

1. Remove the ignite product and re-install.

2. Make sure there are no logical volumes referenced in /etc/fstab that are not physically present in vg00.

-Sri

[Christopher McCray_1]

Hello,

I would go to line 140 of the file and look for something wrong (embedded chars, etc.)

Also look at /var/opt/ignite/recovery/config.recover as well.

Hope this helps

Chris

[Robert Grabowy]

Sridhar, I've already tried those steps w/o any success. I was previously running ignite version B.3.6.82 before I reinstalled with the same errors. thanks though.

Chris, I don't have a config.recover but line 140 is screwed up.
line 140 "size=ninode=unlimited,bsize=1024,version=3,inosize=256KB"
The problem is that I don't understand how that config file is generated. Every time ignite is started, a new config file is created with the problem line.

[Christopher McCray_1]

Hello, again

If memory serves, the files that are created under the latest archive directory are derived from the previous archive directory. Try fixing your system.cfg file and run it again....

Results?

Hope this helps

Chris

[Robert Grabowy]

no such luck. I'm getting the same exact error. I've opened a call with HP but they seem to be stumped as well. Thanks for the help.
Rob