make_tape_recovery hanging

[Scott Mohnkern]

We're running HP-UX 10.20 and doing the following:

$make_tape_recovery -v -p inc_entire=vg00

This should give us a preview before we actually write to tape. However, it seems to start the job, and just sit there (We let it sit for 2 hours). Here's where it stopped:

* Creating local directories for configuration files and archive.

======= 07/06/07 16:17:21 EDT Started make_tape_recovery. (Fri Jul 06
16:17:21 EDT 2007)
@(#) Ignite-UX Revision A.3.7.95
@(#) net_recovery (opt) $Revision: 10.575.1.1 $

* Testing pax for needed patch
* Passed pax tests.
* Recovery Archive Description = Recovery Archive

* Recovery Archive Location = /dev/rmt/0mn

* Number of Archives to Save = 2

WARNING: Filesystem /bulk/1 is not mounted. It will be ignored.
WARNING: Filesystem /bulk/2 is not mounted. It will be ignored.

In? dsk/vg name minor# Associated disks/mountpoints
1 v /dev/vg00 0x00 /dev/dsk/c3t6d0
/dev/vg00/lvol1 /stand 1
/dev/vg00/lvol2
/dev/vg00/lvol3 / 1
/dev/vg00/lvol5 /opt 0
/dev/vg00/lvol6 /tmp 0
/dev/vg00/lvol7 /usr 1
/dev/vg00/lvol8 /var 0
0 v /dev/vg01 0x01 /dev/dsk/c3t4d0 /dev/dsk/c3t3d0
/dev/vg01/lvol1 /fs/pestudies 0

** 0 - The Volume Group or Filesystem is Not included in the
System Recovery Archive
** 1 - The Volume Group or Filesystem is Partially included in the
System Recovery Archive
** 2 - The Volume Group or Filesystem is Fully included in the
System Recovery Archive

* Checking Versions of Ignite-UX filesets
WARNING: Filesystem /bulk/1 is not mounted. It will be ignored.
WARNING: Filesystem /bulk/2 is not mounted. It will be ignored.
* Creating System Configuration.
WARNING: The volume group /dev/vg00 will be only partially included in the
System Recovery Archive. This means that not all files and
directories on this volume group will be restored when the archive is
installed. This message can be suppressed using the "-P s" option for
make_tape_recovery. See make_tape_recovery(1M) for more details.

* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2007-07-06,16:17/system_cfg vg00



And then it just sits there, it's possible to ctrl-c out of it, and get to a prompt, but it doesn't appear to finish.

There's nothing in /var/log/syslog/syslog.log that indicates a problem.

[Fabian Briseño]

hello scott.

What is in these filesystems ?
WARNING: Filesystem /bulk/1 is not mounted. It will be ignored.
WARNING: Filesystem /bulk/2 is not mounted. It will be ignored.

try to comment them out in /etc/fstab and then try to do the ignite.

also look in /var/adm/syslog/syslog.log

[Basheer_2]

Another log to check
/var/opt/ignite/recovery/latest/recovery.log