Operating System - HP-UX
1848033 Members
2702 Online
104022 Solutions
New Discussion

Making boot tape from my new HPUX 11i DVD

 
aneez
Regular Advisor

Making boot tape from my new HPUX 11i DVD

hi all,

i want to create a boot tape ( ultrium 1) from my new HPUX 11i DVD. because i dont have CD drive in my machines. i dont want my current machine image. i want a fresh boot image of the DVD.
what will be the best way to do this?

Thanks
7 REPLIES 7
Steven E. Protter
Exalted Contributor

Re: Making boot tape from my new HPUX 11i DVD

Shalom,

Few options.

1) You can make a DVD drive on one of your systems an NFS share and try the install from there.
2) You can do a clean install on a system and then use Ignite make_tape_recovery to make your tape.


I will post back if I think of more.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Deepak Kr
Respected Contributor

Re: Making boot tape from my new HPUX 11i DVD

Another way is if you have same type of server which is having hp-ux 11i then you can create a bootable tape using make_tape_recovery.

As already given NFS is the next choice.

"There is always some scope for improvement"
aneez
Regular Advisor

Re: Making boot tape from my new HPUX 11i DVD

HI


i will tell you the scenario i have three systems and one has the cd drive and the other two dont have. with the cd drive machine is the productin and so if i want to do the NFS install how can i boot from that CD.
All three machines are 11.0 i need to do a fresh install (11iV1) on the two machines for MCSG cluster

Thanks
Torsten.
Acclaimed Contributor

Re: Making boot tape from my new HPUX 11i DVD

Consider this:

Setup the server with the DVD-ROM as an ignite server, copy the installer DVD to the ignite depot (via ignite UI), copy the latest patch bundles to the same depot and boot + install the clients from the installer depot.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Steven E. Protter
Exalted Contributor

Re: Making boot tape from my new HPUX 11i DVD

Shalom,

Torstens's advice will probably work.

If you really want a bootable tape, you will have to install a system somewhere. Perhaps if you are short of equipment you can get some time in a nearby HP Performance Center.

But Ignite lets you create install points without the benefit of a bootable tape, and you can do network boots off your Ignite server.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1186650

http://docs.hp.com/en/5992-3336/ch03s05.html

http://docs.hp.com/en/B2355-90772/ch07s03.html

http://docs.hp.com/en/5992-3336/apas03.html

I like the last link best, hence I stopped looking at them.

Any depot based software, including the Core OS can be presented and installed from an Ignite server.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
aneez
Regular Advisor

Re: Making boot tape from my new HPUX 11i DVD

Thanks

let me try this tomorrow. is it possible to do nfs mount the cd drive on one of other machine and create the same ?




Torsten.
Acclaimed Contributor

Re: Making boot tape from my new HPUX 11i DVD

You can't boot from the NFS mounted cd.
Consider to do as advised earlier.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!