MC Service Guard and HP-UX 11.0 cluster configuration

[Jose_C_Moraes]

Hello, everybody

Can I configure a cluster with 4 K series nodes and 1 N4000 in HP-UX 11.0 ? If possible, which version of MC-Service Guard ?

TIA
Best regards

[Prashant Zanwar_4]

hi,

It shall be possible, just check the compatibility on HP site..

11.15 or 11.16 can be your choice..

Thanks
prashant

[Sanjay_6 · Accepted solution]

Hi Jose,

You can do that.

Check the sg version and os version compatibility matrix here and that means sg version 11.14 is the right one for you. sg 11.14 is the last release on 11.0

http://docs.hp.com/hpux/onlinedocs/5807/SG%20SGeRAC%20EMS%20Support-Oct04%20Final-jf.htm

Hope this helps.

Regds

[melvyn burnard]

Yes this is possible, but you will only be able to use SG version 11.14 as this is the last version to be supported on HP-UX 11.00

Take a read of the Managing Serviceguard manual available at:
http://docs.hp.com/hpux/ha

[Jose_C_Moraes]

Thanks all of you for the quick answer

Regards