Memory - How much is where?

[Hector Quiroz]

I would like to find out how many memory modules are installed in a K420 and how much is in each slot.

[Carlos G. Ramirez Cruz]

Hi Hector!

I know this method.

1) Reboot the system
2) Stop Boot ("press any key withing 10 seconds")
3) In Main menu select INformation menu
4) In Infomation Menu select MEmory
5) Appears "Memory Module Information"
6) Bye :)

CGRC

[Victor_5]

stm(mstm)-->select 'memory'
Tools-->Information-->run

You will find what you are looking for.

[James R. Ferguson · Accepted solution]

Hi Hector:

Do this:

echo "selclass qualifier memory;info;wait;infolog"|cstm > /tmp/meminfo

You will see the distribution and size of each memory SIM.

If you don't have 'stm' (Support Tools Manager) [a.k.a. 'cstm & mstm'] loaded, go here to download, or get it from your current SupportPlus CDROM from the /cdrom/DIAGNOSTICS/B.11.00 directory:

http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/displayProductInfo.pl?productNumber=B6191AAE

...JRF...

[Ajitkumar Rane]

You can do it as
1> STM or the command , the procedure is already given to you by others, some times this doesent help stm may not show you the information you want. then no option but to

2>Reboot the system the procedure is already given to you.

Or finally you can just open the front cover of your K box and pull out the memory carrires to physically check the modules.

good luck.

[Joe Colucci_1]

Hector,

The amount of memory is written to syslog during startup. You can get the amount of memory by doing:

grep Physical /var/adm/syslog/syslog.log

[Vincenzo Restuccia]

`echo "physmem/D" | adb /stand/vmunix /dev/kmem | tail -1 | awk '$2 > 0 {print $2 / 256 , "MByte" }'`


adb /stand/vmunix /dev/kmem | tail -1 | awk '{print $2}'`