MIB Operation Status

[Mangala_2]

We have a HP-UX 11.00 A 9000/800 machine. The lanadmin command when executed reports that the operation status of the machine's LAN interface as DOWN.
The command ifconfig when executed reports that the machine's LAN interface as "UP".

Which of the above two status is correct?

How do we make the operation status of the LAN interface as UP?
We had tried resetting that LAN interface, but did not get any result.

Eventhough the operation status of the LAN inteface is DOWN network connectivity exists.

[Bill Hassell]

How many LAN cards do you have installed (hint: lanscan or ioscan -kfClan)? lanadmin does not always default to the working LAN card. Use the PPA number from lanscan to get lanadmin to select the correct interface card.

[Mangala_2]

We just one lan card attached to the machine.
The output of lanscan,ioscan and lanadmin commands has been included.

ioscan -kfClan
Class I H/W Path Driver S/W State H/W Type Description
===============================================================
lan 0 56.1 lan3 CLAIMED INTERFACE

lanscan
56.1 0x080009C465F9 0 UP lan0 snap0 1 ETHER Yes 119

lanadmin
Description = lan0 Hewlett-Packard LAN Interface Hw Rev320 Fw rev 268460160
Type (value) = ethernet-csmacd(6)
MTU Size = 1500
Speed = 10000000
Station Address= 0x80009c465f9
Administration Status (value) = up(1)
Operation Status (value) = down(2)
Last Change = 0

[Ravi_8 · Accepted solution]

Hi Mangala

Looks like you have problem in driver.

Install recent Quality pack(QPK1100) patches from support plus media.