HPE Community
Operating System - HP-UX
1833883 Members
1614 Online
110063 Solutions
New Discussion

mkboot failed

 
SOLVED
Go to solution
George Liu_2
Frequent Advisor

‎07-15-2002 10:37 AM

‎07-15-2002 10:37 AM

mkboot failed

# pvcreate -fB /dev/rdsk/c0t4d0
Physical volume "/dev/rdsk/c0t4d0" has been successfully created.
# mkboot -a "hpux -lq" /dev/rdsk/c0t4d0
-a specified but no current boot area on /dev/rdsk/c0t4d0

Thanks
0 Kudos
Reply
2 REPLIES 2
Rich Wright
Trusted Contributor

‎07-15-2002 10:44 AM

‎07-15-2002 10:44 AM

Solution

Re: mkboot failed

First do "mkboot /dev/rdsk/c0t4d0",
Then modify with 'mkboot -a "hpux -lq" /dev/rdsk/c0t4d0"
Reply
George Liu_2
Frequent Advisor

‎07-15-2002 10:54 AM

‎07-15-2002 10:54 AM

Re: mkboot failed

So embarrassing...
Forgot one line. Monday is always a bad day, isn't it?
Thanks.
Case closed.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.