Operating System - HP-UX
1832283 Members
1929 Online
110041 Solutions
New Discussion

modem attached to port 2 on mux

 
Hoey
Occasional Advisor

modem attached to port 2 on mux

I used the following command to add a modem to port 2 of mux and have error "a2 is not a valid port". But it is ok for a1.

mksf -d pci_mux0 -H 0/2/0/0 -p a2 -a 1 -f /dev/cua2a2
mksf: a2 is not a valid port for the hardware at 0/2/0/0

Can anyone help, please?
2 REPLIES 2
Kevin Wright
Honored Contributor

Re: modem attached to port 2 on mux

I would recommend using sam for adding modems..it is alot easier even though I don't use sam often.
MANOJ SRIVASTAVA
Honored Contributor

Re: modem attached to port 2 on mux

I also recommend that please use the SAM to add modems . Incase it fails then do the following :.

edit /etc/uucp/Devices file , add entry like

Direct ttyd3a2 - 9600 direct \D
ACU ttyd3a2 - 9600 ps_mt1432_tone.

Manoj Srivastava