1834066 Members
3035 Online
110063 Solutions
New Discussion

Modem Instalation

 
PALADE DRAGOS SORIN
Occasional Contributor

Modem Instalation

I want to install an external modem (US Robotics Courier Everything 56kbps X2) for dial-in, on Hp rp5470 server (with MUX card)

What kind of cable (null-modem or cross) and settings are necessary to connect the modem?

Thank you,
Best regards.
2 REPLIES 2
Hoefnix
Honored Contributor

Re: Modem Instalation

To connect a modem you need a direct cable (so no cross cable or nullmodem because that the same cable)

If you want it to the console port you would set it up 9600 baud.

Regards,

Peter
Robert-Jan Goossens
Honored Contributor

Re: Modem Instalation

Sorin,

Check this doc.

http://www.compute-aid.com/mux_cab.pdf

Regards,
Robert-Jan