Monitor screen not refresh even after reboot the server

[Fauziah Mahdan]

It was itanium server 11.23 installed with keyboard monitor HP TFT7600 through KVM.
I am running fbackup but it tooks more than 8hrs for new server. I cancel the process by press ctrl c and the monitor hang.
Restart the server and monitor still show the last fbackup status. By telnet from other server I manage to kill console activity but monitor still shows last fbackup status.
Pls help

Fauziah Mahdan

[Jaime Bolanos Rojas.]

Fauziah,

Sounds to me like a hardware issue either with the TFT or the port on the switch, most likely the TFT.
You should try different connection, if that one works, open a support call with HP hardware for further support!

Regards,

Jaime.

[Fauziah Mahdan]

Ok HP eng help me. They said the kvm connector to the server was not fully plugged in. BTW I face hang situation from 2 servers when I run the full backup command fbackup into dds tape drive. What is the best command for fbackup command for itanium server hpux 11.23? If need alert when it request 2nd tape what is the command?