More ip's on 10.20 interface

[Tonny Sejr Kromann]

Hi

How can I add another address to at interface on HP-UX 10.20?

On 11.00 it's possible through SAM but not on 10.20.

--
Thanks for you time
Tonny

[melvyn burnard]

on 11.x, ifconfig has been designed to use and add multpile ip addresses.
On 10.20, you can obtain the latest ifalis patch and install this.
it supplies the man page and all you need to do this.
Look for the patch on this site

[Santosh Nair_1 · Accepted solution]

If you install the patch PHNE_12492 on your system, it adds a command called ifalias which allows you to bind multiple IP addresses to the same lan card. Hope this helps.

-Santosh

[Sanjay_6]

Hi Tonny,

Have a look at the thread below.

http://us-support.external.hp.com/cki/bin/doc.pl/sid=95b6a8f91cdb86e5c2/screen=ckiDisplayDocument?docId=200000049809673

http://us-support.external.hp.com/wpsl/bin/doc.pl/screen=wpslDisplayPatch/sid=b4d843af028c772637?PATCH_PATH=/hp-ux_patches/s700_800/10.X/PHNE_12492&HW=s800&OS=10.20

Hope this helps.

thanks