more memory ------swap device---problem ?

[I.Delic]

Hi guys,
I have to put 2GB memory in my machine. At this point i have 1 GB RAM. My swap device is 2GB and ( in use 76 % )I do not have more space to create the anoher swap device or to increase the existing one. Of coures i could reduce one of my filesystem but i do not want do that.
Do i have to expect some problem by placing more RAM in my machine.
It is RP5450 with Hp-UX 11.11 on it

Thank you in advance

Idriz

[Michael Steele_2]

None. Go for it. Use STM and the GSP logs for monitoring.

[Pete Randall]

Idriz,

You should be fine. You may want to turn on pseudo-swap but that's the only thing I can think of.


Pete

[Patrick Wallek]

To make sure that you will able to use all of your RAM when you add the additional 2GB, you will need to set the kernel parameter swapmem_on to 1.