Operating System - HP-UX
1833798 Members
3078 Online
110063 Solutions
New Discussion

MSA2012fc with HP-UX: does it work?

 
SOLVED
Go to solution
Olivier Masse
Honored Contributor

MSA2012fc with HP-UX: does it work?

Now I know that HP-UX is not officially a "supported" OS for the MSA2000, and an older thread in May 2008 asked the same question.

But support aside, has anybody actually made the MSA2012fc _work_ with HP-UX? I can't just go on an buy one and test later...

My EVA is almost full and I'm just looking at a cheap way to store backup static data while staying on fiber. I don't want a NAS, don't want to have to invest in a EVA4400, and the MSA2012fc seems to fit my requirements perfectly.

Thanks
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: MSA2012fc with HP-UX: does it work?

Hi Olivier,

I never tried, but I think you will see the same result as when you present an EVA vdisk in the wrong mode (like linux instead of hp-ux) - unpredictable.
In other (simple) words - array and server don't speak the same language - the addressing mode is different. You should ask HP, if and when hp-ux support is expected.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jozef_Novak
Respected Contributor
Solution

Re: MSA2012fc with HP-UX: does it work?

Hello Olivier,

HPUX support will be officially introduced for MSA2012 in January 2009. Maybe you could wait a few weeks and go ahead in a supported way shortly.

Jozef
Olivier Masse
Honored Contributor

Re: MSA2012fc with HP-UX: does it work?

Good news.

I'll try to work myself with presales to have this confirmed.

Thanks!
Olivier Masse
Honored Contributor

Re: MSA2012fc with HP-UX: does it work?

Closed