HPE Community
Operating System - HP-UX
1840366 Members
2992 Online
110163 Solutions
New Discussion

Re: multiple subnets on single interface

 
Aleksandr Konstantinov
Occasional Contributor

‎10-28-2000 04:41 AM

‎10-28-2000 04:41 AM

multiple subnets on single interface

I need to access two different networks
through one physical network interface
on workstation 735 ruinning HP-UX 10.20 .
All I found is ifalias, but it only alows
to have multiple ip's in SAME subnet.
Is there any solution ?
0 Kudos
Reply
3 REPLIES 3
Stefan Farrelly
Honored Contributor

‎10-29-2000 09:07 AM

‎10-29-2000 09:07 AM

Re: multiple subnets on single interface


Sorry, not possible on HP-UX at present. I believe it will be a future feature in 11.x

For now either 2 IPs, same subnet, on one lancard, or you need an additional lancard for 2 IPs on 2 subnets.
Im from Palmerston North, New Zealand, but somehow ended up in London...
0 Kudos
Reply
Stefan Farrelly
Honored Contributor

‎10-30-2000 12:22 AM

‎10-30-2000 12:22 AM

Re: multiple subnets on single interface


Heres another summary on your questions;

http://www.dutchworks.nl/htbin/hpsysadmin?h=3&dn=8787&q=multiple%20subnets&fh

Im from Palmerston North, New Zealand, but somehow ended up in London...
0 Kudos
Reply
CHRIS_ANORUO
Honored Contributor

‎10-30-2000 01:57 AM

‎10-30-2000 01:57 AM

Re: multiple subnets on single interface

It is not possible. If you do a check on the /etc/rc.config.d/netconf file and also use lanadmin for more info.
When We Seek To Discover The Best In Others, We Somehow Bring Out The Best In Ourselves.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.