need 11.i v1.5 for rx4610

[Steven Bucek]

Boss just gave me an rx4610 for use in my test / development lab, how cool! I had bought hpux version 11.23 to install but it turns out this machines only supports v1.5. Does anyone have a copy they can part with or trade? I dont think they will let me spend more money on OS's just for a test box. Maybe I should just got with linux?

[Sanjay_6]

Hi Steve,

You cannot trade a copy. License protected.

If you have a support contract linked to your itrc id, you can order a copy of software from this link,

http://us-support.external.hp.com/swd/bin/doc.pl/sid=c567617810db2cc185/screen=SWHandles

Hope this helps.

Regds

[Florian Heigl (new acc)]

better go with 'borrow' which would make the thing easier and less hassle.
OTOH there's not much sense in them buying You a system without OS, I'm not sure You should accept it that way.

I don't know if there are legal issues involved, if not I could also try setting up an ignite server for You - You only need to set up a tftp server and could fetch the rest from my golden image. It at the very least is a challenging task. :)

Maybe one of the moderators could comment on this - his machine should include a 2-user license at the very least, shouldn't it?

and, btw: linux is not half of the fun.

[Jeff Schussele]

Hi Steve,

I don't think that's true.
The rx46XX is a fairly new line and uses the Itanium-2 chip. 11iv1.5 is an Itanium chip OS and won't run on the Itanium-2 systems.
You'd need 11iv1.6 at least, I believe.
This was the first OS to support Itanium-2.

My 2 cents,
Jeff

[Steven Bucek]

Thanks for the info guys. I thought about trying to ignite it, but I wouldn't i need to have the v1.5 already configured in my ingite server before i could deploy it?

[Robert-Jan Goossens]

Hi Steve,

11i v1 = 11.11
11i v1.5 = 11.20 (Discontinued)
11i v1.6 = 11.22
11i v2 = 11.23

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00232868

You will need V1.6.

Hope this helps,
Robert-Jan

[Steven Bucek]

Hi Jeff. I have a rx4610, the first version of this sever that has the original itanuim in it. I beleive the rx4640's have the itanim 2's.

could i still get the linux enablement kit for this box?

[Steven Bucek]

Hi Robert thanks for posting and for the details. If 11i v1.6 will run on the original itanium then the solition is to get version 1.6.

Thanks everyone for your help.

steve

[marie-noelle jeanson_1]

Steve,

Yes, rx4610 is supported with 11i v1.6. See the HP-UX 11i v1.6 Install and config guide on docs.hp.com:
http://docs.hp.com/hpux/onlinedocs/5187-0187/5187-0187.html

Under System Configurations, it says:
The HP-UX 11i v1.6 release fully supports the following servers and workstations:
rx4610 (4-way server)

Regards,

Marie-Noelle

[Olivier Decorse]

Hi,

for linux on rx4610, take a look at this thread :
"Installing Linux AS 2.1 on Itanium Rx4610"
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=327171

Olivier.