Need to configure Load balancer Active \ Active

[fizan]

Hi Experts,

I need your help on configuring this Active \ Active load balancer..

currently my config is:

# HP_APAPORT_INTERFACE_NAME[0]=lan0
# HP_APAPORT_GROUP_CAPABILITY[0]=3
# HP_APAPORT_CONFIG_MODE[0]=FEC_AUTO
#
HP_APAPORT_INTERFACE_NAME[1]=lan1
HP_APAPORT_CONFIG_MODE[1]=LAN_MONITOR

HP_APAPORT_INTERFACE_NAME[2]=lan2
HP_APAPORT_CONFIG_MODE[2]=LAN_MONITOR
#
===========================================

At present its is APA under Active \ Passive
supported, can you help me to configure active \active?

Thanks...

[Matti_Kurkela]

For Active/Active, you'll need to configure the device at the other end of the network cables too. Without knowing what type of device it is, it is not possible to suggest the correct configuration.

You really should read the APA documentation. It includes configuration examples for some major switch brands.

http://www.hp.com/go/hpux-networking-docs
-> HP-UX Auto Port Aggregation (APA) software

APA configuration changed a lot in HP-UX 11.31, so pick the version of the APA Administrator's Guide that matches your OS version.

MK