NetTerm emulation problem

[Cindy Wolford]

Hi there,

We have a new HP 11.0 installation on a new L3000 server.

I only have MirrorDisk/UX and a few patches installed....nothing else.

I'm experiencing a problem when using sam....and the thought is that my emulation is not setup correctly (therefore giving me the problems).

I'm using NetTerm 4.2. It is setup as vt100 emulation.

When I login to the L3000 server and type echo $TERM, it says vt100.

But, I keep having problems when in sam....and like I said, the thought is that there may be a problem with my emulation setting.

Any ideas or suggestions? Is there a different emulation setting that I need to use for 11.0 on a L3000 server?

Is there a different software package that I should be using?

TIA !!!
Cindy

[Sridhar Bhaskarla]

Hi Cindy,

What problems do you have with sam?. Does your "clear" work?. If so, then your emulation setting should be ok.

-Sri

[Steven E. Protter]

You need to get the latest Gold pack installed.

There are several problems fixed with this.

Also, there is a specific sam patch dealing with erratic behavior on the 11.11 side. Perhaps there is one on the 11.00 side as well.

Steve

[Rodney Hills]

Cindy,

Try configuring NetTerm for vt220, and setting TERM to vt220.

I have been using NetTerm3.2 with sam, swinstall, etc without problems.

-- Rod Hills