Operating System - HP-UX
1834811 Members
2214 Online
110070 Solutions
New Discussion

nettl and io subsystems (How to find)

 
Paul Thomson_2
Super Advisor

nettl and io subsystems (How to find)

Could anyone tell me if there is a definitive guide as to what I should log / increase logging on in nettl to correspond with the particular lan card on a system.

For example.
# ioscan -fnuClan
Class I H/W Path Driver S/W State H/W Type Description
===================================================================
lan 0 0/0/0/0 btlan3 CLAIMED INTERFACE HP PCI 10/100Base-TX Core

/dev/diag/lan0 /dev/ether0


# nettl -status
Logging Information:
Log Filename: /var/adm/nettl.LOG0*
Max Log file size(Kbytes): 1000 Console Logging: On
User's ID: 0 Buffer Size: 8192
Messages Dropped: 0 Messages Queued: 0

Subsystem Name: Log Class:
NS_LS_LOGGING ERROR DISASTER
NS_LS_NFT ERROR DISASTER
NS_LS_LOOPBACK ERROR DISASTER
NS_LS_NI ERROR DISASTER
NS_LS_IPC ERROR DISASTER
NS_LS_SOCKREGD ERROR DISASTER
NS_LS_TCP ERROR DISASTER
NS_LS_PXP ERROR DISASTER
NS_LS_UDP ERROR DISASTER
NS_LS_IP ERROR DISASTER
NS_LS_PROBE ERROR DISASTER
NS_LS_DRIVER WARNING ERROR DISASTER
NS_LS_RLBD ERROR DISASTER
NS_LS_BUFS ERROR DISASTER
NS_LS_CASE21 ERROR DISASTER
NS_LS_ROUTER21 ERROR DISASTER
NS_LS_NFS ERROR DISASTER
NS_LS_NETISR ERROR DISASTER
NS_LS_NSE ERROR DISASTER
NS_LS_STRLOG ERROR DISASTER
NS_LS_TIRDWR ERROR DISASTER
NS_LS_TIMOD ERROR DISASTER
NS_LS_ICMP ERROR DISASTER
FILTER ERROR DISASTER
NAME ERROR DISASTER
NS_LS_IGMP ERROR DISASTER
FC ERROR DISASTER
FORMATTER ERROR DISASTER
STREAMS ERROR DISASTER
BASE100 INFORMATIVE WARNING ERROR DISASTER
PCI100BT INFORMATIVE WARNING ERROR DISASTER
SPP100BT ERROR DISASTER


From the subsystems available in nettl, which should I use to check if my NIC is dropping packets ?

Is there say a guide to IO card / driver / nettl subsystem and perhaps a way to determine if a system is dropping excessive tcp packets.

When I use lanadmin / netstat -p / -s its not too revealling.

Thanks

Argh ye land lovers !
1 REPLY 1
Steven E. Protter
Exalted Contributor

Re: nettl and io subsystems (How to find)

You might try these two.

NS_LS_UDP ERROR DISASTER
NS_LS_IP ERROR DISASTER

You might also try this tool, its slightly easier to use.

http://hpux.connect.org.uk/hppd/hpux/Gtk/Applications/ethereal-0.9.15/

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com