nettl

[steven Burgess_2]

Hi

i've just been working through some documentation with regard to nettl.

I've started a trace , ran a command to a dtc and performed a copy of ports etc

Stopped the trace

Ran a filter on the raw file using the mac address of the dtc.

I then rebooted the dtc and performed the same function, this time I was not able to perform commands on the dtc as it was rebooting

Just as a starter i performed a grep -i error
on the 2 files

When the dtc was being rebooted I received

Init/Resp Flag: Response Error Flag: No Error Reserve Flags: 1

Whats the best way to determine the obviuos errors, is there any reference anywhere to error messages return codes etc

Does anyone have any advice?

[steven Burgess_2]

Also

I can do a nettl -ss to see my subsystem

i use -e all or ns_ls_driver for my 10 meg lan card

What are the other sub systems, where can I reference these

Thanks in advance

[Paula J Frazer-Campbell]

Steven

Have a look at nettladm.

Paula