Network routeing problem

[Noble Sebastian]

Hi , friends
My hp d 9000 , root disk fail , i replace disk , install hp 11.0 ,
now i try to add route that time "netwok unreachable " that message comeing can u replay any one ....thanks noble

[Peter Godron]

Hi,
without knowing more about your setup, I would guess:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=858269
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=203315

Did you do your network setup when you installed the OS ?
Can you see localhost ?
Can you see your gateway ?
Can you ping the DNS server ?

Please also read:
http://forums1.itrc.hp.com/service/forums/helptips.do?#33 on how to reward any useful answers given to your questions.

[Asif Sharif]

Hi Noble,

Check first that you have configure IP properly with subnet etc.

For add a route from SAM you need to follow this,

SAM>Networking and Communications>Routes>Actions>Add Default Route.


Regards,
Asif Sharif

[Steven E. Protter]

Shalom,

You probably need to consult with your networking department.

Reasons:
1) You may have incorrect information in /etc/rc.config.d/netconf that is making the route command invalid.
2) Network configuration may prevent this route.
3) HP-UX 11.00 which is out of support by default requires ping to work for networking to work properly. This can be changed with an ndd command but if ping is blocked all network functioning will be compromised.

SEP

[Noble Sebastian]

thanks ,friends

i add host then problem is solve

[Noble Sebastian]

Thanks Friends i add ip address to host then give gateway of thhat then now routing is working