Operating System - HP-UX
1834517 Members
1908 Online
110068 Solutions
New Discussion

Networking HP-UX and RTE-A

 
Ed Bowen
Occasional Contributor

Networking HP-UX and RTE-A

We recently upgraded workstations and are now having trouble communicating with an HP A-900 processor on the network.

The old set-up is as follows:
HP A-900 running RTE-A
HP 720 Workstation running HP-UX 10.20
10base-2 lan

New set-up is:
HP A-900 running RTE-A on the 10base-2 lan
HP B-2600 workstation running HP-UX 10.20 on the 10base-T lan
An unmanaged switch
10base-T to 10base-2 lan convertor

Prior to the upgrade, the A-900 welcome1.cmd file would call a program that would loop until it could make a socket connection to a process on the 720 workstation.

Now, if the process on the B-2600 is not listening on the socket first, the A-900 will always fail to connect even after the B-2600 has opened the socket.

Any suggestions?

Thanks,
Ed
1 REPLY 1
rick jones
Honored Contributor

Re: Networking HP-UX and RTE-A

a packet trace might be interesting - try getting a copy of tcpdump onto your workstation and see what it looks like.

also, once the b2600 is up, can the A900 ping it? or the A900 the B2600?

i cannot recall if the RTE stuff ever responded to linkloop messages, but those might be an interesting test
there is no rest for the wicked yet the virtuous have no pillows