HPE Community
Operating System - HP-UX
1834629 Members
3196 Online
110069 Solutions
New Discussion

nfsstat times report 0ms

 
mark still_2
Occasional Contributor

‎03-12-2003 02:55 PM

‎03-12-2003 02:55 PM

nfsstat times report 0ms

We have changed the NFS protocol from udp to tcp. While this has increased performance the nfsstat -m reports the srtt times as 0ms. The srtt had shown actual times when the upd protocol was being used on these 11.0 HPUX systems. Any ideas as to why the srtt is now reported as 0?

Thanks,

Mark.
0 Kudos
Reply
2 REPLIES 2
John Dvorchak
Honored Contributor

‎03-12-2003 03:21 PM

‎03-12-2003 03:21 PM

Re: nfsstat times report 0ms

No clue but maybe a patch addresses this issue. Have you keep current with patches?
If it has wheels or a skirt, you can't afford it.
0 Kudos
Reply
Jeff Schussele
Honored Contributor

‎03-12-2003 04:06 PM

‎03-12-2003 04:06 PM

Re: nfsstat times report 0ms

Hi Mark,

I'd hazard the guesses that:

1) srtt may be a udp only stat
2) The command will not show sub-ms values & the actual values are sub-ms.

The rule of thumb with these type problems is - What changed? In your case NFS from UDP to TCP, so it probably has to do with that issue.

Rgds,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.