nPar Creation of 2nd Core

[Dan Matlock_1]

I'm tryin to parcreate another Cell, so that I have 2 x nPars. I get this error:

Error: Operation not approved because it would result in the number of active components (of type Core(s)) exceeding the number of component-specific usage rights across the complex. Components without usage rights are required to be inactive. Additional usage rights can be purchased from HP and the associated RTU (Right to Use) codeword(s) retrieved from the Utility Pricing Solutions portal (http://www.hp.com/go/icap/portal), and applied to the complex.""

* So is there some license issue or am I just doing something wrong?

[Torsten. · Accepted solution]

Do you have iCAP cells or CPUs installed?

See
http://docs.hp.com/en/B9073-90183/index.html

[Torsten.]

Try

icapstatus

http://docs.hp.com/en/B9073-90183/rn01re05.html

[Dan Matlock_1]

Acually I think i do have ICAP.

Software version: B.08.00
System ID: nxeair01
Serial number: xxxxxxxx
Product number: AB442A
Unique ID: xxxxxx
System contact e-mail: Not set
From e-mail: Set to the default ('adm')
Asset reporting: on
Temporary capacity warning period: 15 days
Exception status: No exception

Local nPartition Status
-----------------------
Total number of configured cores: 8
Number of Intended Active cores: 4
Number of active cores: 4
Number of inactive cores: 4
Additional cores that can be activated with current usage rights: 0
Number of cores that could be activated with additional usage rights: 4
Number of cores that can be activated with temporary capacity: 0
Number of cores that are deconfigured or attached to inactive cells: 0

Instant Capacity Resource Summary
---------------------------------
Number of cells without usage rights: 2
Number of inactive cells: 2
Amount of memory without usage rights: 16.0 GB
Amount of inactive memory: 16.0 GB
Number of cores without usage rights: 10
Number of inactive cores: 10
Number of cores that must be deactivated (insufficient usage rights): 0
Temporary capacity available: 0 days, 0 hours, 0 minutes

Allocation of Instant Capacity Resources among the nPartitions
--------------------------------------------------------------
Intended Actual
nPar Total Active Active =======Inactive======= Runs
ID Cores Cores Cores Cores Memory Cells iCAP nPar Name
==== ===== ======== ====== ====================== ==== ======================
0 8 4 4 4 0.0 GB 0 Yes nxeair01 (local)
N/A 6 N/A N/A N/A 16.0 GB 2 N/A Unassigned Cells