NTP client and server both

[Pradeep_3]

Hi gurus,

How to configure HP-UX box as a ntp client of windows machine and ntp server to other hp-ux boxes.

[Ivan Krastev]

See configuring NTP docs - http://docs.hp.com/en/B2355-90110/ch08.html

regards,
ivan

[Pete Randall]

The simple/lazy way is to use SAM > Time > NTP Broadcasting and NTP Network Time Sources.


Pete

[Pradeep_3]

Unable to open url

[Sharma Sanjeev]

Hi

To configure ntp

To configure xntpd:

Edit the xntpd configuration file /etc/ntp.conf. You can also use SAM to configure xntpd.

Determine how you want to configure xntpd by reading the rest of this chapter and the xntpd man page. Then add the appropriate statements in /etc/ntp.conf.

Set the environment variable XNTPD to 1 in the file /etc/rc.config.d/netdaemons. This causes xntpd to start automatically whenever the system is booted.

Set the appropriate value for your local time zone in the file /etc/TIMEZONE.

Run the xntpd startup script with the following command:


/sbin/init.d/xntpd start



Run the ntpq program with the -p switch to verify that xntpd is forming the correct relationships with other NTP hosts. (See â Querying xntpdâ .)

This is from Link only

Regards
Sanjeev