ODE perfver question (I can't find a better place to post this)

[Kelli Ward]

Hi all,
I have a question about perfver I hope someone can answer. (I didn't notice a better forum section to post this.)
I want to run section 1 on 4 drives that are loaded in a K-class server.
The TESTCONF command shows all 4 drives. 3 of them have section 1 selected, the 4th says N/A
If I use the SELECT command with no options, it shows only the 3(selected)drives. I can't seem to get the 4th drive to select to test for section 1.
Does anyone know the perfver command structure to do this?
Please let me know.
Thanks,
Kel

[Jeff Schussele]

Hi Kel,

I know you've probably checked required/recommended patches for Online Diags - but just in case as there are specific patches for specific arrays - here's the URL:

http://docs.hp.com/cgi-bin/otsearch/getfile?id=/hpux/onlinedocs/diag/st/str_9909.htm&searchterms=perfver&queryid=20020411-104939

HTH,
Jeff

[Kelli Ward]

Hi,
In the end, I rebuilt the drive.
This system went through a recent upgrade.
The drive was a very old Quantum Empire series, placing a newer model Seagate seemed to do the trick. I think the old drive might not have been compatible with the upgrade.
Thanks,
Kel