Operating System - HP-UX
1847829 Members
5052 Online
104021 Solutions
New Discussion

OLRAD to remove a card w/o replacement

 
SOLVED
Go to solution
Rex Pommier
Frequent Advisor

OLRAD to remove a card w/o replacement

Hi.

I have a superdome with some cards that are unused that I would like to remove. Can I use the OLRAD command to remove these cards without replacing them or will OLRAD get mad at me if I'm not adding or replacing? HP-UX 11.23 on PA-RISC.

Rex
4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: OLRAD to remove a card w/o replacement

I guess it will get "mad", because it is supposed for replacement and addition this time - not removal only.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: OLRAD to remove a card w/o replacement

Rex,

As you will see from the manual here:

http://docs.hp.com/en/B2355-90862/ch01s01.html?btnNext=next%A0%BB

(see first row of table 1-1)

online delete is not supported in 11iv2

This functionality is available in 11iv3.

HTH

Duncan

I am an HPE Employee
Accept or Kudo
Rex Pommier
Frequent Advisor

Re: OLRAD to remove a card w/o replacement

Thanks for the information. I missed the line in the doc that says delete isn't supported.

Rex
Rex Pommier
Frequent Advisor

Re: OLRAD to remove a card w/o replacement

I had missed the line in the doc that said that what I wanted to do isn't supported.