OS installation problem on integrity VM guest.

[한국 휴렛팩커드]

Hello, Dear.

I have 1- VM host and 2 VM guests.
After creating virtual machine(guests) on VM host, I started installation OS(HPUX11.31) on one of guest(vm name is vm1) using ignite server.
But, processing was always stopped as below stage.
===========================
..................
insf: Installing special files for esdisk instance 1 address 64000/0xfa00/0x0
insf: Installing special files for pseudo driver dlpi
insf: Installing special files for pseudo driver kepd
insf: Installing special files for pseudo driver framebuf
insf: Installing special files for pseudo driver sad
* Constructing the bootconf file.
* Setting primary boot path to "0/0/0/0.0x0.0x0".
Primary boot path set to 0/0/0/0.0x0.0x0 (/dev/rdisk/disk1)
* Starting install of the source (HP-UX Core Software).
* Running command: "/opt/swm/bin/swm install
-s192.0.0.1:/var/opt/ignite/depots/Rel_B.11.31/core
-xsuspend_after_load=true -xallow_oe_selection=true
-xdefer_kernel_rebuild=true -xautoreboot=true
-f/tmp/ign_configure/software_file -xpatch_save_files=true "

======= 03/31/08 08:24:54 UTC BEGIN Software Install (user=root) (jobid=000001)

* Reading Target System's Installed Product Database (IPD)
* Target IPD: vm1
* Reading Source Depot
* Source depot: 192.0.0.1:/var/opt/ignite/depots/Rel_B.11.31/core
* Analyzing Software To Be Installed
=================================
System Spec :
VM host : 2 cores 4GB mem, 2 146GB disks,
vm1 guest : 2 vcpu, 1GB mem, /dev/rdsk/c1t1d0s2
vm2 guest : 2 vcpu, 1GB mem, /dev/rdsk/c1t1d0s3

Could someone let me know what the problem is?

Thanks/Chris.

[Steven E. Protter]

Shalom í êµ­ í ´ë  í ©ì»¤ë ,

I've always wanted to say that.

Chris, I don't actually see an error message.

Maybe post a little more.

All vm guests need a boot device, a cpu, and memory. If they lack any of these things the installation will not work.

Please provide hardware and software information on the Host machine, including version of vpars.

sEP

[Torsten.]

It does not look like a problem so far. Make sure you have at least HPVM version 3.00. Be patient and have a look into the logs (e.g. ignite server).

[Eric SAUBIGNAC]

Bonjour í êµ­ í ´ë  í ©ì»¤ë ,

As said SEP, no error message ?

What are those partitionned disk c1t1d0s2 and c1t1d0s3 and why did you choose to work this way ?

1GB of RAM is a very low value for an HP-UX system, whether it is a virtual machine or not

Eric

[melvyn burnard]

as already discussed, I see no errors here, BUT your memory configurations is too low.
HP-UX 11iv3 requires a MINIMUM of 1.5GB to install succesfully, using only 1GB will result in various issues preventing an install. This applies to a stand alone machine as well.
Also, your disc specification looks suspicious.
Why do you have an s2 and s3? what size are these sections?