out of phase DATE

[Alberto T. Tepox]

Hello every body.
I've replaced the system board of a rp5450 because the system was hanging periodically.
The fail dissapear however now the system's date its out of phase, i replaced the system board again but the problem persist, i don't know what to do?

Can anybody tell me what i must to do to solve this problem or what should to look at the system to start the troubleshooting.

Thks every body.

[Dennis Handly]

I assume you are talking about clock drift? How bad is it?
Do you have a NTP server?
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1126846
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1094617

[A. Clay Stephenson]

There was a problem that caused excessive clock drift on some rp5450's.


http://www1.itrc.hp.com/service/patch/patchDetail.do?BC=main|search|patchDetail{PHSS_32705,{hpux:11.11,}}|&patchid=PHSS_32705&sel={hpux:11.11,}

Have a look at firmware patch PHSS_32705.