partitions on a disk

[Srimalik]

I have created a few partitions on a disk(c4t4d0) with the idisk command.

I expected that after doing this I will have four device nodes in /dev/dsk for each partition /dev/dsk/c4t4dos1..4, but these device nodes are not present :-( ( even after a reboot).

idisk shows the partitions correctly. google is telling that there is a very limited support of partitions in HP, is this support this limited(I am not able to use the partitions)?

Thanks
-Sri
PS:
vg00 is on a different partitioned disk for which there are three dev nodes s1,s2 and s3.

[Hasan Atasoy · Accepted solution]

insf -e ?

[Srimalik]

Thanks Hasan, Full marks :-)