HPE Community
Operating System - HP-UX
1846943 Members
4763 Online
110257 Solutions
New Discussion

patch update rp3410 with HP-UX B.11.11 to 11.31

 
Vijay Chiruvella
New Member

‎10-08-2008 12:59 PM

‎10-08-2008 12:59 PM

patch update rp3410 with HP-UX B.11.11 to 11.31

I recently inherited 2 9000/800/rp3410 servers with HP-UX 11.11 on them. I need to update the OS to 11.31 for TuXedo. These servers have been un-used for 2 years and
0 Kudos
Reply
3 REPLIES 3
Ivan Krastev
Honored Contributor

‎10-08-2008 01:16 PM

‎10-08-2008 01:16 PM

Re: patch update rp3410 with HP-UX B.11.11 to 11.31

Better use cold install, instead of update.

regards,
ivan
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎10-08-2008 09:08 PM

‎10-08-2008 09:08 PM

Re: patch update rp3410 with HP-UX B.11.11 to 11.31

An update would be like this:

11.11 => 11.23 => 11.31

Better to do a cold-install!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
melvyn burnard
Honored Contributor

‎10-09-2008 05:30 AM

‎10-09-2008 05:30 AM

Re: patch update rp3410 with HP-UX B.11.11 to 11.31

I agree with the other two, abearing in mind you probably have no real history information, I would go straight for the cold install.
Make sure you check for any firmware requirements, as well as disk space andmemory, HP-UX 11.31 needs more than 11.11
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.