Performance

[Dakka]

I need to know the Spec Rate for the following HP workstations:

HP D350, D380
HP L1000, L2000
HP K360 , K380

[Bill McNAMARA_1]

I won't really call them workstations.. servers is better..

See http://www.hp.com/go/servers for a start.

The new naming may confuse
The Lclass is no the RP54xx

AClass is RP24XX

Where the XX is based on server model (CPU revision, and model number based ie: L1000, L2000, L3000..)

Gives links to Performance related sites.
It really depends on the benchmark and CPU revision and number of CPUs.
But is a good start.

http://www.hp.com/products1/servers/rackoptimized/rp5400series/infolibrary/index.html


Later,
Bill

[George_Dodds]

link below lists various classes with tpm's for each model.

http://www.abtechsys.com/800.html

cheers

George

[Kirby Collins]

We have not published SPEC CPU2000 results for any of the systems mentioned, but we have published CPU95 results for some of them.

from http://www.spec.org/osg/cpu95/results/rint95.html
SPECint_rate95
base peak
D350 (100MHz, 2cpu) 80.6 89.0
D380 (180MHz, 2cpu) 201 219
K460 (180MHz, 4cpu) 380 418
K580 (240MHz, 6cpu) 849 902
L2000 (440MHz, 4cpu) 1073 1186

from http://www.spec.org/osg/cpu95/results/rfp95.html
SPECfp_rate95
base peak
D350 (120MHz, 2cpu) 139 143
D380 (180MHz, 2cpu) 209 221
K460 (180MHz, 4cpu) 368 398
K580 (240MHz, 6cpu) 558 604

We did not publish any K360 or K380 results, but we do have K460 and K580 numbers.

SPEC, SPECfp, and SPECint are trademarks of the Standard Performance Evaluation Corporation.