HPE Community
Operating System - HP-UX
1833752 Members
2551 Online
110063 Solutions
New Discussion

Permanent lan0:1

 
SOLVED
Go to solution
Rashid Hamid
Regular Advisor

‎11-15-2006 07:48 PM

‎11-15-2006 07:48 PM

Permanent lan0:1

How to put "ifconfig lan0:1 10.10.10.10 netmask 255.255.255.0" permanent during boot time. Is it in /etc/rc.config.d/netconf?

Thanks
I'm Parit Madirono/Parit Betak Boyz
0 Kudos
Reply
1 REPLY 1
Ivan Krastev
Honored Contributor

‎11-15-2006 07:52 PM

‎11-15-2006 07:52 PM

Solution

Re: Permanent lan0:1

Add another entry in netconf:


INTERFACE_NAME[1]=lan0:1
IP_ADDRESS[1]=10.10.10.10.
SUBNET_MASK&[1]=255.255.255.0
BROADCAST_ADDRESS[1]=""
INTERFACE_STATE[1]=""
DHCP_ENABLE[1]=0


and changes will be permanent.


regards,
ivan
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.