Ping response

[Suni Raj]

Hi,

When I ping to the system I gets a message reply that 'Source Quench Recieved'

Can anybody tell me why this happens?

Regds
Suni

[Robert-Jan Goossens · Accepted solution]

Hi Suni,

Check this doc from the itrc.

http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000066940070

Document description: NNM reports node down after ping(1) produces Source Quench messages
Document id: OV-EN007034

Doc is about network node manager, but the explanation is the same.

Regards,
Robert-Jan

[V.Tamilvanan]

Hi,

Look into this below link

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=3341

[Bharat Katkar]

Any way you can analyze the cause as per the doc, but if you really don't want to see that message just execute this following:

# ndd -set /dev/ip ip_send_source_quench 0

Source quech generally occurs when one of the device responds too fast.

You need to see that NIC communication parameters are set properly.

[sam_111]

hi

please check the link

http://www.activexperts.com/activmonitor/functions/icmp/rfc792/

I have also attached a doc just check it u will get to know what the problem is.

regards,

sam

[Suni Raj]

HI,

Ur answer really helped me to solve the problem.

Thanks & Cheers
Suni