Printer additions using JetAdmin

[Clifton Smith]

I am attempting to add a dot matrix HP printer to an HP9000 machine using JetAdmin. The printer is fairly old (HP 2563A), and I was wondering if someone could tell me which driver would be compatible with this dot matrix printer. I can't seem to get any of the dumbplot configs to work. Thank you in advance.

[Helen French]

Hi,

Check this out:

http://us-support.external.hp.com/cki/bin/doc.pl/sid=23c2b11f0430620cc5/screen=ckiDisplayDocument?docId=200000036518803

HTH,
Shiju

[harry d brown jr]

You should have a model HP2562a in /var/spool/lp/models.


If not, I attached it:

live free or die
harry

[harry d brown jr]

I typo'ed I meant hp2563a, which is the attachment.

live free or die
harry

[S.K. Chan]

In /var/spool/lp/model these are the drivers you can use ..
hp2563a
hp2564b
hp2565a
hp2566b
hp2567b
In fact if you compare the files, they are the same.

[D. Jackson_1]

The above should work just fine.
I have also used the PCL3 modelscript with good results.

HTH

[MANOJ SRIVASTAVA]

Hi Clifton


Use this driver


http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskName=download+drivers+%26+software&taskId=8418&prodSeriesId=25460&prodTypeId=18972&prodSeriesName=hp+2932a+dot+matrix+printers

and configure the printer.

Manoj Srivastava