HPE Community
Operating System - HP-UX
1838192 Members
4414 Online
110125 Solutions
New Discussion

Re: Printer - rbootd

 
SOLVED
Go to solution
Clutier_1
Occasional Advisor

‎12-15-2003 07:32 PM

‎12-15-2003 07:32 PM

Printer - rbootd

When i want to create a new printer with HP Jet Admin, i have this msg at the end of the configuration :

Completed creating BOOTP/TFTP configuration database for cidc-hp2007.
Please wait...
Can't perform this task, due to network port has been used by rbootd.
Press the return key to continue ...

I have no entry for rbootd in /etc/services.
0 Kudos
Reply
1 REPLY 1
Mark Grant
Honored Contributor

‎12-15-2003 07:36 PM

‎12-15-2003 07:36 PM

Solution

Re: Printer - rbootd

rbootd is started during boot.

Check /etc/rc.config.d/netdaemons and see if "START_RBOOTD" is set to 1

If so, and you don't need this service, change it to 0 and kill off the rbootd which is probably running.
Never preceed any demonstration with anything more predictive than "watch this"
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.