HPE Community
Operating System - HP-UX
1834485 Members
3481 Online
110067 Solutions
New Discussion

Printing to another site - needs snmp ?

 
SOLVED
Go to solution
TwoProc
Honored Contributor

‎06-26-2008 10:15 AM

‎06-26-2008 10:15 AM

Printing to another site - needs snmp ?

Hey, I've got a remote site I've setup a tunnel to print to over a WAN lease line. We noticed traffic for port 9100, which was expected. Do I also need to let snmp port 161 go there as well? Looks like I see of this some going to the printer, and I'd just as soon block that too.

Or, can anyone tell me what the minimum port open scenario I can have to print to a foreign printer?
We are the people our parents warned us about --Jimmy Buffett
0 Kudos
Reply
1 REPLY 1
Tim Nelson
Honored Contributor

‎06-26-2008 10:22 AM

‎06-26-2008 10:22 AM

Solution

Re: Printing to another site - needs snmp ?

Unless you are using management software (e.g. hpnpadmin )to manage the printer then only 9100 is needed.

user addqueue to configure or add manually so you skip all the snmp junk.

Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.