Problems after install a Patch

[Alejandro Cóceres]

After install the patch PHNE_27886, the system no restart, is locked when start the OpenView (wait busy), i cant in for console, & i cant in for telnet, only response to ping.

In the check to install the patch, no give error, but never boot again.

The equip' is a 9000 K220 whit ux11.00

what i can do to revert the problem.

Thanks...

[RAC_1]

interrupt the boot procedure and boot into single user mode. do mountall and unconfig the patch.

Check for error before doing this. Check swagentd.log, swinstall.log for details.

Also check syslog.

[Alejandro Cóceres]

How interrupt the boot procedure, & in single user?...

[RAC_1]

loginto console and while booting it
To discontinue, press any key within 10 seconds.

press any key then it boots.
it goes to main menu.
say bo pri isl
say Y and it is hard booted now.

now say hpux -is.
you will boot into single user mode. say mountall and follow what I have given.

post the results.