questions

[kps gill]

I have few questions.

1.) How to determine the value of controller (Cxtxdx) from the hardware path...

2.) How to turn on Auto negotiation.

3.) how many lUNS can be assigned per HBA

4.) is it possible to club two NIC each of 1 gbps connectivity to get a througput of 2 gbps.

thnaks in advance

[Torsten.]

Hi,

1) see http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1095477

2) it depends on the hardware, for gigabit cards this is the default

3) the limit is not on HBA, it is per system
- it depends on the OS version

4) more or less, you need to install APA
http://www.hp.com/products1/serverconnectivity/adapters/apa_overview.html?jumpid=reg_R1002_USEN

[kps gill]

more specificly if I have a particlar hw path as below how to determine the value of controller(Cxtxdx) from it....

disk 24 0/3/0/0.8.0.255.0.8.0

[Torsten.]

It will be
cxt8d0

The value of "x" will be set by your system.

You will see the result by running an "ioscan -fnCdisk".