re : rx2660 help

[Vincent_5]

Hi Guys,
Can anyone help, I'm trying to install hpux 11.31 on a rx2660 install with a HP smart array p400 card, somehow it does not allow me to setup the operating system. It hang. Can anyone advice. Attach is the screen shot for your referrence.

Regards
Vincent

[Vincent_5]

Hi Guys,
Sorry , I forget , I have try with HP 11.31 sept 2007 media , which it does not work out. and also a sept 2008 media

Please help.

Regards
Vincent

[Torsten.]

Where is your console connected?

Go to EFI and run conconfig:

Shell> conconfig

[Vincent_5]

Hi Torsen,
I'm connected to the RX2660 server via the seral link with my laptop running putty.

Regards
Vincent

[Kapil Jha]

have you tried to completely power it off and start it again.

BR,
Kapil+

[Vincent_5]

Hi Guys,
I have already try turning off the power and on again, I even try removing the existing array and recreate again, but is still the same. Please advice??

Regards
Vincent

[Torsten.]

I'm sure your console setting is VGA.



As said, run this:



Shell> conconfig



to confirm!

[Vincent_5]

Hi Torsen,
Thanks for the help, you save my day.You are right the console is set to VGA. I have change it to serial and it work.


Regards
Vincent