Recommended Link Aggregation / APA / trunking configuration for BL870c

[Glenn Joseph Andal]

Hi,

I'm new on implementation of APA on Blade system. Can someone shed some light on how and where should I configure trunking?

Here is my high level config.

BL870c with 8 lan ports connected in 2 procurve switch 6120XG (2 each). I've already configured trunking in our access switches but still experiencing intermitent connection including ftp hangups for this blade system.

I'm not sure if the problem resides in bl870c or on the access siwtch with duplex mismatch issue.

Hope someone can guide me on the basic port aggregation and switch trunking configuration of blade in procurve switch.

thank you,

Otep